How To Use BORPower®

Detailed Instructions

• Renew the motor oil and the oil filter.
• After completing the oil change, start the motor and warm it up for about 20 minutes.
• Shake the BORPower® bottle well for at least 3 minutes to assure that the nanoparticles dispense properly.
• Shut down motor and fill required amount of BORPower® into motor oil inlet.
• After application, drive the vehicle for at least 25 km (16 miles) or let the engine run for 20-25 minutes.

BORPower® takes several hours of driving time after application to become effective to its full extent, with a motor mileage of 60,000 km (40,000 miles) after application. This also holds if the motor oil or the oil filter is replaced earlier.

Important advice

Please following our recommendations below when using BORPower®:

· Only use BORPower® as a nano lubricant additive for 4-stroke engines. NNT Nanotechnology takes no responsibility for motor damage due to the incorrect application of BORPower®.