Tests & Certificates

The quality and effectiveness of BORPower® has been validated several times by accredited industrial and scientific research and testing facilities in the USA and Europe, whilst the production of BORPower® is consistently monitored according to the standards of ISO9001:2000.
BORPower® will cut the fuel consumption of your car depending on its age and condition, as well as reducing CO2-emissions, increase motor power and motor oil lifetime.  The full list of these international bodies is summarised below:

Southwest Research Institute San Antonio Texas, USA, April 2006   

The effectiveness of BORPower® has been validated in abrasion tests at the Southwest Research Institute. The tests followed the ASTM norms D5183 and D4172. After careful analysis of abrasion (scar) before and after applying BORPower®, the Southwest Research Institute could certify the effectiveness of BORPower®.  [Report]

TÜV Germany (Technical Inspection Agency), Hanover, Germany, March2007  

The value of BORPower® has been validated in exhaust and fuel consumption tests at the TÜV North (Technical Inspection Agency), Hanover, Germany. The tests followed the 98/69/EG and 1999/100/EG norms and were carried out using a brand-new Mercedes S320 CDI. After careful analysis of the fuel consumption and CO2 emissions before and after applying BORPower®, the TÜV North could certify to NNT Nanotechnology the effectiveness of BORPower®. The TÜV North continues to monitor the quality of BORPower® in future test campaigns. 
[Certificate] [Before BORPower®] [After BORPower®] [Test Vehicle]

The TÜV North will continue to test and monitor the quality of BORPower® in future test campaigns.

Federal Institute for Materials Research and Testing, Berlin, Germany, February, 2007

The nano-crystalline nature of the active ingredient nano boron in BORPower® was confirmed experimentally using x-ray diffractometry. The crystallite size of nano boron is 100nm.  [Report1] [Report2]

Motor Power Test

The following test reports show that BORPower® improves the motor power between 3% and 10%. This is possible since BORPower® greatly reduces friction and wear in the engine.

Motor power test at MAHA, Zurich, Switzerland, April 2007

Motor power tests with a Renault Megane revealed an increase (at the car wheel) of 3% at 6.000 revolutions per minute after applying BORPower®.    [Report1] [Report2] [Report3]

For further detailed test results please click on the following PDF file "all-tests.pdf" or alternatively contact us on our email address info@nanoboron.co.uk

An Independent & Scientific Evaluation of the Effectiveness of BORPower® on Fuel saving performed at the Motor Industry Research Association (MIRA), UK.

NanoBoron have carried out at MIRA an IRTE/ BTAC (Institute of Road Transport Engineers /British Advisory Consortium) Type One Test on an 18 tonne flatbed rigid vehicle, before and after the application of BORPower S-600 and recorded an outstanding 10.8 % saving in fuel consumption. A comprehensive report has been produced by Lorry Logic , an  independent consultant company having more than 20 years experience performing this type of tests. [Report]